HOUSING and FRAME: pressed in die-cast aluminium and designed with a very small surface exposed to wind. Cooling fins are integrated into the cover. SUSPENSION CONNECTION: version with connector for suspension installation directly on the housing. For median lane installation, the lamp must be equipped with the relative accessories in die-cast aluminium. The accessory must be applied to the housing by means of 4 steel rods with a diameter of 8mm each. OPTICS: highly efficient secondary PMMA lens combined with flux recovery system in high-performance metallic polycarbonate. DIFFUSER: plexiglass. COATING: the first stage includes grey epoxy e-coating, resistant to corrosion and saline environments. Then the fixture is coated with an ANTHRACITE acrylic based UV-stabilised resin WIRING: standard with 530mA and double-insulated driver 220-240V 50/60Hz. STANDARD SUPPLY: device for automatic temperature control. In the event of an unexpected LED temperature rise caused by particular weather conditions or a LED failure, the system will reduce the luminous flux to lower the working temperature and guarantee proper operation. Safety diode to protect against voltage peaks LED: Latest generation LED technology, Ta-30+40°C life 50.000h L80B50 Photobiological safety class: exempt group At the customer’s request, the lamp can be equipped with several light dimmers installed directly on the fixture: - Bi-power dimming with virtual midnight option. - 1-10V dimmable driver with external control. - Power line carrier (PLC) remote control. The fixture comes with a watertight IP67 connecter for line connection. This enables easy and quick installation
• Architectural buildings
• Public buildings
• Hotel lobbies
• Outdoor
Disco